Customer Support
0
Sluiten

Categories

Filters
    Thursday 24 December 2022

    Best Power Amplifiers from SoundImpess - SoundImports

    SoundImpress stands for outstanding quality, timeless designs, and Dutch craftsmanship. Every SoundImpress amplifier gets extensively tested and manually assembled at our headquarters in Groningen, the Netherlands. Our amplifiers are built to last. Therefore, SoundImpress amplifiers come with a standard 5-year warranty!

    SoundImpress amplifiers contain components from European industry-leading manufacturers such as Purifi, ICEpower, and Hypex. For years, it was our goal to develop a product that truly fulfils the company's core motto – SoundImports: Helps the music sound the way it should.

    In this blog, we would like to present to you our top 3 power amplifiers from SoundImpress.

     

    SoundImpress PU400-2CH Stereo Amplifier | 400WPC | Eigentakt | Powered by Purifi

    Let's start with the high-end class-D stereo amplifier, based on Purifi Audio's Eigentakt technology: the SoundImpress PU400-2CH stereo amplifier. This amp offers its users a powerful 425W per channel. Making this SoundImpress amplifier very capable and highly affordable.

     

    SoundImpress PU400-2CH Stereo Amplifier | 400WPC | Eigentakt | Powered by Purifi

     

    • Powered by state-of-the-art Purifi Eigentakt technology  
    • Up to 2 x 450 Watt at 2 ohm load
    • Efficiency up to 94%, further reducing power consumption
    • Unprecedentedly low distortion over frequency and power range
    • Balanced analog inputs (XLR)
    • Banana-plug speaker connectors
    • High quality aluminum chassis to offer extra heat dissipation capacity
    • Dimmable LED
    • Assembled by hand in the Netherlands

     

    Thanks to high precision parts such as op-amps, high voltage gate drivers and high current MOSFETs, this amplifier can power almost any speaker. Be it a single subwoofer or your sophisticated 3-way tower. Thanks to the efficiency a high loop gain can be obtained, creating an unparalleled performance.

    The Eigentakt implementation from Purifi is one the best amplifier technologies available. This class-D technology meets high standards and gives super performance at any playback level, regardless of load. This results in a stable, dynamic and realistic sound image, of any music genre. This amplifier will squeeze (with a proper music source and proper pre-amplification) all the dynamics out of your music without distortion, and at any volume.

     

    In addition to the two-channel configuration, we also offer a mono version of this amplifier: the SoundImpress PU400 Mono Amplifier | 1 x 400W | Eigentakt | Powered by Purifi. Perfect to use, for example, as an amplifier for your subwoofer or to drive your speakers separately.

     

    SoundImpress HY122-2CH Stereo Amplifier | 125WPC | Ncore® | Powered by Hypex

    The following amplifier we would like to highlight in this blog is the SoundImpress HY122-2CH stereo amplifier, powered by Hypex.
    The SoundImpress HY122-2CH Stereo amplifier is a compact, high performance, two channel and no-nonsense class-D power amplifier. It incorporates the proven and renown Hypex Ncore® technology for nothing less than impressive performance!
    The performance stands out with authoritative and tightly controlled low registers, high dynamics and crystal clear mid- and high-frequencies. The super-low noise level generates a completely black background to reveal the tiniest of details in every recording. 

     

    SoundImpress HY122-2CH Stereo Amplifier | 125WPC | Ncore® | Powered by Hypex

     

    • Ncore® technology inside
    • Impressive performance despite load 
    • Neutral and transparent reproduction
    • Flat, fully load-independent frequency response
    • Plenty of power combined with high efficiency
    • Compact design
    • XLR input, binding posts output
    • Assembled by hand in the Netherlands

     

    This amplifier can deliver all its power from as low as 2 ohm impedance combined with low idle loss, very low distortion and noise levels. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency independent distortion behaviour and very low radiated and conducted EMI. Tthis results in performances such as the max output power of 125 Wrms at 4 ohm per channel, a Signal-to-Noise Ratio (SNR) of 118 dB and astonishing distorting level of 0.0015%.

    An amplifier is only as good as the power supply it contains. In this SoundImpress amplifier, the power supply and amplifier are located on one board. The switched-mode power supply (SMPS) providing the power for the amplifier is a compact, high power, highly efficient, regulated half bridge converter with synchronous rectification on the main output rails. These properties make this technology ideal for powering Class D audio amplifiers.

     

    SoundImpress ICE700-4CH Quad Amplifier | 400WPC | Powered by ICEpower

    The last amplifier we would like to present in this blog is the SoundImpress ICE 700-4CH quad amplifier, powered by ICEpower.
    As sound sources have evolved from LP’s to CD’s to streaming audio, a high quality power amplifier remains a key ingredient to any good Hi-Fi stereo setup. No matter whether you need an amplifier for your small bookshelf speakers or tower speakers, this amplifier with ICEpower technology inside creates a fantastic high quality result. 
    Its four channels make the SoundImpress ICE700-4CH the ideal amplifier for 4-zone applications in a mono system or 2 zones in a stereo system.

    SoundImpress ICE700-4CH Quad Amplifier | 400WPC | Powered by ICEpower

    • ICEpower technology inside
    • 4 x 400 watts at 4 ohms
    • Neutral and transparent reproduction
    • Flat, fully load-independent frequency response
    • State-of-the-art, high efficiency amplification
    • ErP and Energy Star compliant power supply
    • XLR input, binding posts output
    • Assembled by hand in the Netherlands

     

    The SoundImpress ICE700-4CH is a audiophile, high performance class-D power amplifier. The performance stands out with high dynamics and crystal clear mid- and high-frequencies. All SoundImpress amplifiers are hand assembled in the Netherlands. The custom milled aluminum enclosure, which houses two ICEpower 700AS2 amplifier modules, is the best thermal material for audio devices. It can operate from both 110 and 230 VAC mains voltage due to it's universal mains input compatibility featuring an automatic input voltage doubler. 

    This amplifier can deliver all its power from as low as 4 ohm impedance combined with low idle loss, very low distortion and noise levels. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency independent distortion behaviour and very low radiated and conducted EMI. This results in performances such as the max output power of 400 Wrms at 4 ohm per channel, a Signal-to-Noise Ratio (SNR) of 117 dB and astonishing distorting level of 0.005%.

     

    Find the SoundImpress amplifier that fits your needs

    In addition to the amplifiers we have highlighted above, our range of SoundImpress is of course much wider. Do you want a complete overview of all our SoundImpress amplifiers? Through this link you will find the page where all our SoundImpress amplifiers can be found. Do you have more questions following this blog? Please feel free to contact our support department. We are happy to help! 

     

     

    No Nonsense, just high-precision parts for Audiophiles

    For now, SoundImpress offers puristic power amplifiers. This allows you to combine our high-performance amplifiers with your existing home audio speakers, to ensure you get the maximum sound out of them, hearing details you have not heard before. Being equipped with four channels makes them perfect for DSP systems. But not only the components are puristic; the amplifier modules are protected by minimalistic custom-milled black anodized aluminium enclosures giving them an imposing look that takes over all the attention from your other home audio devices. Every amplifier comes with our own stamp of approval, our iconic “S”-logo, on the front plate. This branding ensures that you own a piece of real quality, that is built to last – with many more products to come. Stay tuned.

    Recente artikelen

    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »
    ← Return to the back office    This store is under construction Any orders placed will not be honored or fulfilled Hide