The SOLO 50 applies the SOLO 100 concept to a more compact cabinet. This makes the units suitable for smaller rooms where the larger version would be too physically overpowering or the bass too powerful.
Visaton SOLO 50 DIY Components Pack
With a net volume of 50 liters, it is essential to have an internal resonance absorber as with the SOLO 100 owing to the Q-factor of the B 200 full-range driver. This can also be used to fine tune the bass reflex. The lower limiting frequency is not as low as with the SOLO 100 but is certainly sufficient for small to medium-sized rooms. The absorber must be carefully damped again. The correcting circuitry is designed by analogy to the SOLO 100. If you replace the 15 ohm resistance with a 22 ohm, the increase in high-frequency frequency response will be eliminated and the result as measured in the measuring room was a well-balanced spectrum. Listening tests showed, however, that, as a result of the beaming effect of this wide-range speaker, a slight increase is beneficial in most listening environments.
Note: Cabinets are not included.
There are no reviews written yet about this product..
