Klantenservice
0
Sluiten

Categorieën

Filters

    LBB-5 5 x 26650 Lithium Battery Charger Board / Module

    € 28,88€ 34,95 Niet op voorraad
    Lithium battery power is your best option when building high power portable sound projects. This battery holder charges five 26650 Li-Ion batteries when used with a 5 to 24 VDC power supply (not included). Enjoy prolonged listening with this 21 VDC output... Toon meer
    • Verzending altijd verzekerd en met track & trace
    • Voor 16u besteld, vandaag verstuurd
    • Gratis verzending vanaf €99
    • In-house technische support

    Productomschrijving

    Highlights

    • 21 VDC output power for amplified speakers and other portable projects
    • Works with 5 to 24 VDC power supplies for versatility
    • Common 2.1 x 5.5 mm input power jack
    • Uses five standard 26650 3.7 VDC Li-Ion batteries (not included)

     

    Product details

    Dayton Audio LBB-5 5 x 26650 Lithium Battery Charger Board / Module

     

    Dayton Audio's LBB-5 battery holder board delivers high current portable power to small amplifiers, 200W amp boards, or other 21 VDC projects by combining the voltage from five 26650 Li-Ion batteries (not included). It's small enough to fit inside a portable speaker and has multiple 21 VDC outputs to power an amp, tone control, Bluetooth, and other preamp component boards. It also has one output socket for 5 VDC devices. Enjoy the extended listening time you get from Li-Ion batteries on a single charge. 26650 Li-Ion batteries come in a variety of amperages, and to get the longest playtime from a 200W amplifier or amp board use at least 5000mAh batteries.

     

    There's no need to remove the batteries from the holder because the Dayton Audio LBB-5 has a built-in charge circuit. Just plug in a power supply and the over/under charge circuit prevents correctly installed batteries from overcharging and fully discharging, shortening their life. The LBB-5 battery board needs a 5 to 24 VDC power supply (Not included) to start the charging process and to start its output power. This enables you to listen to music while the batteries are charging with this amazing battery holder. To view charging and battery status press the push button on the battery board. If you remove a battery, the power supply must be plugged into the holder for the battery board to start working again when the battery or batteries are reinstalled. The polarity of the batteries must match the polarity of the battery holder to prevent damage.

     

    Note: The Dayton Audio LBB-5 is an independent battery holder board and its design does not work with Dayton Audio KAB board's built-in charge circuit. Use Dayton Audio battery board KAB-BE with Dayton Audio KAB Bluetooth amp boards.

     

    Specifications: Output voltage: 21 VDC @ 10A Max and 5 VDC @ 2A • Input voltage required: 5 to 24 VDC at least 2A recommended • DC coax jack size: 2.1 x 5.5 mm center (+) polarity • Batteries: Five x 26650 Li-Ion (not included) • Dimensions: 6" W x 4.5" D x 1.71" H (152 x 114.5 x 43.5 mm) • Charge times to 90% capacity: 5V 2A 32 hrs., 12V 2A 6.5 hrs., 19V 2A 3.5 hrs., 24V 2A 3 hrs.

    Specificaties

    Artikelnummer
    LBB-5

    Reviews

    0 from 5Based on 0 reviews
    Schrijf je eigen review

    Er zijn nog geen reviews geschreven over dit product..

    LBB-5 5 x 26650 Lithium Battery Charger Board / Module
    € 28,88
    € 34,95
    LBB-5 5 x 26650 Lithium Battery Charger Board / Module
    0 Op voorraad
    Toevoegen aan winkelwagen
    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? JaNeeMeer over cookies »
    ← Keer terug naar de backoffice    Deze winkel is in aanbouw. Eventueel geplaatste orders zullen niet worden gehonoreerd of verwerkt. Verbergen