Noch keinen Account? Benutzerkonto anlegen
Ihr Warenkorb ist leer
The HiVi D10.8 represents a design in which the voice coil is positioned over an undercut central pole piece with a large thermally stabilized neodymium magnet at the bottom and a high energy ceramic magnet on the top.
Tymphany raises the bar on full-range drivers with their PLS-75F25AL02 3" speaker. Advanced features such as a copper pole piece cap, semi-progressive surround, and large roll surround reduce distortion, even during extreme power transients!
16 cm (6.5") high efficiency full-range loudspeaker with tweeter cone.
20 cm (8") high efficiency full-range loudspeaker with tweeter cone.
Tang Band's W1-1070SH 8 ohm 1" full range driver is great for use in compact speaker systems. With an aluminum cone, santoprene surround, neodymium magnet, and ferrofluid cooling this is one impressive micro speaker.
Tang Band's T1-1925S features a passive radiator-assisted 1" driver that plays from 150 to 20,000 Hz in a tiny 2.56" x 1.14" package. Design modern speakers never before thought possible.
Tang Band's T0-2008S features a passive radiator-assisted 20.1 mm driver that plays from 200 to 20,000 Hz in a tiny 2.17" by 0.94" package. Design modern speakers never before thought possible.
The Revelator midrange and midwoofers, both well known for their sliced paper cone technology.
Small midrange driver with linear wide frequency response, ideally suited in very small cabinets in combination with ribbon tweeters and magnetostatic tweeters.
Dayton Audio's PN395-8 15" pro woofer is designed to deliver reliable low frequency operation with extreme output capability and minimal power compression. Weighing only 16 lbs, and featuring a 4" inside-outside wound voice coil, powerful neodymium motor,
Dayton Audio's PN470-8 18" pro woofer is designed to deliver reliable low frequency operation with extreme output capability and minimal power compression. Weighing only 16.5 lbs and featuring a 4" inside-outside wound voice coil, powerful neodymium motor
This compact driver features a self-shielding neodymium magnet system, flat aluminum sandwich cone, integrated protective screen, and extremely low second and third-order distortion.
The CHR-120 is a brand-new 6.5-inch high fidelity multi-purpose high-volume driver design from Markaudio.
The CHR-120 is a brand-new 6.5-inch high fidelity multi-purpose high-volume driver design from Markaudio.
The SB Acoustics SB36WBAC21-4 1” Wide-band 4 ohm driver is a good choice for micro/mini speakers or car audio applications.
The SB Acoustics SB36WBAC21-4 1” Wide-band 8 ohm driver is a good choice for micro/mini speakers or car audio applications.
The SB Acoustics SW26DAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s.
The SB Acoustics SW26DAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
Tectonic's TEBM28C10-4/A miniature BMR is a speaker driver with an extended frequency response and an extremely wide directivity. It combines the benefits of Tectonic bending-wave technology and pistonic modes of operation. This driver is ideally used in
The TEBM36S12-8/A Balanced-Mode Radiator (BMR) is a driver with an extended frequency response and wide directivity compared with a conventional driver. It combines the benefits of Tectonic bending-wave technology and pistonic modes of operation. It is id
The TEBM46C20N-4B 3" full-range from Tectonic offers extremely flat response from 200 to 20,000 Hz. It is an ideal driver for compact audio applications that require a full-range, high performance acoustic solution.
The SB Acoustics SW26DBAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
The SB Acoustics SW26DBAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
A compact high quality subwoofer. That is optimized for smaller compact enclosures.
