Alle Kategorien
KundenserviceIncl.Excl.MWST.
anmelden
Noch keinen Account? Benutzerkonto anlegen
0
Ihr Warenkorb
Ihr Warenkorb ist leer
Sluiten
Noch keinen Account? Benutzerkonto anlegen
Ihr Warenkorb ist leer
For use with any standard 3/8" shaft L-Pads, this faceplate and knob set provides the finishing touch. Replace lost or damaged knob and faceplate set. Faceplate diameter is 3-1/8".
Recessed "L" pad housing for flush mounting "L" pads in custom speaker cabinets. Knob included. 2-5/8" x 2-5/8" x 1". For use with any standard 3/8" shaft diameter L-pad.
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaf
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 16 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 16 ohm loads, features a 3/8" sha
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance at a constant 16 ohm load. This 100 watt RMS L-pad is designed to be used with 16 ohm loads, features a 3/8" shaft length,
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 15 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 100 watts RMS, is designed to be used with two 8 ohm loads, features
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 50 watts RMS, is designed to be used with two 8 ohm loads, features a
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 15 watts RMS and is designed to be used with two 8 ohm loads. Feature
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft l
L pads are recommended for use in tweeter and midrange crossover networks to match individual output levels, while maintaining a constant 8 ohm impedance. 1" shaft allows mounting in 3/4" wood. Includes face plate, knob, hardware, and wiring instructions.
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 100 watts RMS, is designed to be used with two 8 ohm loads, features
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 50 watts RMS, is designed to be used with two 8 ohm loads, features a
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 15 watts RMS and is designed to be used with two 8 ohm loads. Feature
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft l
L pads are recommended for use in tweeter and midrange crossover networks to match individual output levels, while maintaining a constant 8 ohm impedance. 1" shaft allows mounting in 3/4" wood. Includes face plate, knob, hardware, and wiring instructions.