Customer Support
0
Sluiten

Categories

Filters

    L-Pad Attenuators

    Price

    -
    19 Products
    L-Pad Knob and Faceplate for 3/8" Shaft

    L-Pad Knob and Faceplate for 3/8" Shaft

    For use with any standard 3/8" shaft L-Pads, this faceplate and knob set provides the finishing touch. Replace lost or damaged knob and faceplate set. Faceplate diameter is 3-1/8".

    Direct leverbaar
    € 4,95
    L-Pad Faceplate for "High"

    L-Pad Faceplate for "High"

    Recessed "L" pad housing for flush mounting "L" pads in custom speaker cabinets. Knob included. 2-5/8" x 2-5/8" x 1". For use with any standard 3/8" shaft diameter L-pad.

    Direct leverbaar
    € 4,95
    L-Pad Attenuator 3/8" Shaft 8 Ohm
    100 w | mono

    L-Pad Attenuator 3/8" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaf

    Direct leverbaar
    € 19,95
    L-Pad Attenuator 3/8" Shaft 16 Ohm
    50 w | mono

    L-Pad Attenuator 3/8" Shaft 16 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 16 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 16 ohm loads, features a 3/8" sha

    Direct leverbaar
    € 19,95
    L-Pad Attenuator 3/8" Shaft 16 Ohm
    100 w | mono

    L-Pad Attenuator 3/8" Shaft 16 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance at a constant 16 ohm load. This 100 watt RMS L-pad is designed to be used with 16 ohm loads, features a 3/8" shaft length,

    Direct leverbaar
    € 19,95
    L-Pad Attenuator 3/8" Shaft 8 Ohm
    50 w | mono

    L-Pad Attenuator 3/8" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft

    Direct leverbaar
    € 15,95
    L-Pad Attenuator 3/8" Shaft 8 Ohm
    15 w | mono

    L-Pad Attenuator 3/8" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 15 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft

    Direct leverbaar
    € 14,95
    L-Pad Attenuator 1" Shaft 8 Ohm
    100 w | stereo

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 100 watts RMS, is designed to be used with two 8 ohm loads, features

    Direct leverbaar
    € 34,95
    L-Pad Attenuator 1" Shaft 8 Ohm
    50 w | stereo

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 50 watts RMS, is designed to be used with two 8 ohm loads, features a

    Direct leverbaar
    € 29,95
    L-Pad Attenuator 1" Shaft 8 Ohm
    15 w | stereo

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 15 watts RMS and is designed to be used with two 8 ohm loads. Feature

    Direct leverbaar
    € 18,95
    L-Pad Attenuator 1" Shaft 8 Ohm
    100 w | mono

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft

    Direct leverbaar
    € 19,95
    L-Pad Attenuator 1" Shaft 8 Ohm
    50 w | mono

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft l

    Direct leverbaar
    € 14,95
    L-Pad Attenuator 1" Shaft 8 Ohm
    15 w | mono

    L-Pad Attenuator 1" Shaft 8 Ohm

    L pads are recommended for use in tweeter and midrange crossover networks to match individual output levels, while maintaining a constant 8 ohm impedance. 1" shaft allows mounting in 3/4" wood. Includes face plate, knob, hardware, and wiring instructions.

    Direct leverbaar
    € 9,95
    L-Pad Attenuator 1" Shaft 8 Ohm

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 100 watts RMS, is designed to be used with two 8 ohm loads, features

    Direct leverbaar
    € 34,95
    L-Pad Attenuator 1" Shaft 8 Ohm

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 50 watts RMS, is designed to be used with two 8 ohm loads, features a

    Direct leverbaar
    € 29,95
    L-Pad Attenuator 1" Shaft 8 Ohm

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This stereo L-pad is rated at 15 watts RMS and is designed to be used with two 8 ohm loads. Feature

    Direct leverbaar
    € 18,95
    L-Pad Attenuator 1" Shaft 8 Ohm

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft

    Direct leverbaar
    € 19,95
    L-Pad Attenuator 1" Shaft 8 Ohm

    L-Pad Attenuator 1" Shaft 8 Ohm

    L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft l

    Direct leverbaar
    € 14,95
    L-Pad Attenuator 1" Shaft 8 Ohm

    L-Pad Attenuator 1" Shaft 8 Ohm

    L pads are recommended for use in tweeter and midrange crossover networks to match individual output levels, while maintaining a constant 8 ohm impedance. 1" shaft allows mounting in 3/4" wood. Includes face plate, knob, hardware, and wiring instructions.

    Direct leverbaar
    € 9,95
    Compare 0

    Add another product (max. 5)

    Start comparison

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »
    ← Return to the back office    This store is under construction Any orders placed will not be honored or fulfilled Hide