Make your own karaoke without breaking the bank with this TDA7946 chip amplifier board with microphone jacks.
This easy-to-use 2.1 amplifier board is big on power, delivering 15 watts into stereo channels and an additional 30 watts into a mono subwoofer channel. Use this board for multimedia sound systems, boom box projects, digital signage, or even mobile audio.
Does your next project require a high-end amplifier, Bluetooth 5.0 connection, Wi-Fi streaming, multi-room use, or maybe even all of them? Then boy, do I have news for you! The brand new Up2Stream Amp V3 is here to satisfy all your needs!
The Sure Electronics 2 x 15 Watt 8 Ohm Class D Audio Amplifier with Bluetooth 2.1 – JAB1 is an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board with enough power to drive stereo speakers
If you absolutely have to have 500 clean watts of stereo power, look no further than this amplifier board. It integrates high performance class D audio amplifier driver IRS2092SPBF and 200V Single N-Channel HEXFET Power MOSFET IRFB4227 by using one channe
Step up the output of your smartphone to drive high impedance headphones with this Class AB headphone amplifier board. The LM4881 IC is used to provide up to 15.7 dB of high quality gain to power even the most power hungry headphones.
This Class-D audio amplifier board simplifies the creation of exceptional sounding custom multi-channel systems. It has perfect class-T architecture and is integrated with a high performance STA508 chip supporting dual channel audio amplification.
The Sure Electronics 2 x 15 Watt 8 Ohm Class D Audio Amplifier with Bluetooth 2.1 – JAB1 is an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board with enough power to drive stereo speakers
1,500 watts of clean monoblock power are available with this amplifier board. It integrates high performance IRS2092 and IR MOSFET IRFB4227 supporting single channel audio amplification.
Dayton Audio DSPB-100 combines a 1 x 100W amp board with the ADAU1701 digital signal processor which enables you to customize sound using SigmaStudio software and Dayton Audio ICP1 Bluetooth programmer. Use the DSPB-100 as the heart of your DSP audio proj
The Dayton Audio KAB-100M Bluetooth Amplifier Board makes it quick and easy to add audio to your project, speaker build, point-of-purchase display, kiosk, or any location where music or sound enhances the experience. With an output of 1 x 100 watts, there
2,000 watts of clean monoblock power are available with this amplifier board. It integrates high performance IRS2092 and 200V Single N-Channel HEXFET Power MOSFET IRFB4227 supporting single channel audio amplification by using one channel half bridge topo
This 1 x 300W Class-D audio amplifier board integrates TI’s high performance TAS5613 supporting single channel audio amplification.
2,500 watts of clean monoblock power are available with this amplifier board. An IRS2092 controls six IRFB4227 HEXFET power MOSFETS to deliver power effortlessly. Two 60 to 95 VDC power supplies are required for operation. See note below.
The Dayton Audio KAB-215 Bluetooth Amplifier Board allows for quick and easy addition of audio to any project. With an output of 2x15 watts, there is more than enough power to drive stereo speakers, yet it is small enough to fit in tight spaces.
JAB5 is a 4CH audio amplifier board integrated with Bluetooth 5.0 (supporting aptX HD) and ADAU1701 DSP, offering a real all-in-one audio solution for customers.
The EVAL2 mono evaluation kit creates easy signal and power supply connections for a mono 1ET400A setup. The kit is developed for evaluation purposes, but is perfect suitably for DIY applications
Are you working in a project in some area, commercial buildings, elevators or DIY projects that only need one speaker but with high amplification? Acrylics' Mono Amplifier can get the job done! It can output a maximum 100W in Mono channel which is perfect
Build small, low voltage stereo audio projects with this TDA2822M mini amplifier board. It works perfect for projects that require between 5 and 9 VDC.
The T-Amp revolution continues here! This compact stereo amplifier based on the Tripath TA2024 chip outputs 2 x 15 watts and is perfect for building into audio projects or use as a standalone amp.
The TPA3116D2 2 x 50W Class-D stereo audio amplifier features high-quality sound reproduction and volume control with anti-pop on/off switch.
Enjoy designing your own small portable Bluetooth audio 2.1 channel DIY project with this Bluetooth 4.1 digital amplifier board. Customize the sound with built-in subwoofer, satellite, and master volume controls.
Enjoy creating a new wireless remote audio project with this all-in-one, easy to use 3.0 Bluetooth 2.1 channel three piece amplifier board with bass, treble, and subwoofer volume controls. It delivers 50W into stereo channels and an additional 100W into a
