Collection

000-1144 | 0,70 mH | 0,40 Ω | 3% | 18 AWG

High-purity copper wire, “baked” into a perfect shape to create a distortion-free inductor, for all audio applications.

Electrolytic Non-Polarized Cap | 8,0 µF | 10% | 100V

These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 5% dissipation factor and are rated at 100V which are effective to approximately 200 watts.

DLCP to UcD Signal Cable

50cm balanced signal cable with 4-pin connectors on both sides to connect the DLCP to the UcD modules.

DS-452 Push Switch

Push switch.

Anti-Mode 8033S-II Subwoofer DSP Module

Anti-Mode X2D Room Correction DSP Module

4FE42-4F Full-range Woofer

Euro Plug Male

BIANCO-8MW250 Mid-range Woofer

Audiophile-Grade 16 core speaker wire

C200 Pro Headphone Amplifier

Rubber Boot For Heavy Duty Toggle Switch

Optional rubber boot for toggle switch. Dimensions: 20.2 mm base x 24.2 mm H; M12x0.75 thread.

CMR | 4,70 µF | 3% | 400 V

Taking inspiration from the highly regarded MR range, the CMR employs the same micro-phonics series film construction and acrylic tube damping. CopperConnect technology dramatically reduces grain boundary crossings in the end connection and enables design

MR | 25 µF | 3% | 400 V

The MR range has been developed as a direct result of the 2 year research programme conducted between ClarityCap and the world renowned Acoustics Research Centre at the University of Salford. No stone was left unturned; the research encompassed all of the

CSA | 20 µF | 3% | 250 V

Taking inspiration from the highly regarded ESA range, the CSA employs the same carefully researched micro-phonics reducing processing parameters. CopperConnect technology dramatically reduces grain boundary crossings in the end connection and enables des

Satori TW29TXN-B-8 TeXtreme Dome Tweeter

The SB Acoustics SATORI TW29TXN-B-8 TeXtreme Dome Tweeter uses unique materials and great design to create low-distortion, dynamic and high efficiency driver.

37128 Electrical Clip Kit 28 Pcs.

Rebuild those old power cables and test leads using Grip Tools' electrical clip kit. Six different sizes are included for handling circuits rated up to 30 amperes.

Tozzi One Kit White | DIY Kit | Components and Cabinets | Pair

The Tozzi One is a compact high-fidelity pure point source loudspeaker system designed by Mark Fenlon. It is easy to self-assemble and when completed, becomes a high-class product that stands above other loudspeaker kits.

CHP-70 Black Full-range Woofer

The MarkAudio CHP-70 driver is designed to make a semi-vintage classic sound similar to the smaller full-range driver designs from the 1950ʼs.

W3-1876S Subwoofer

A true long throw subwoofer, the diminutive Tang Band W3-1876S 3" driver provides a solid bass kick to the smallest possible speaker systems.

001-0630 | 0,82 µF | 2% | 800 V

Jantzen Audio Silver capacitors are possibly the most detailed caps on the market. These caps are constructed of a specially wound metallized polypropylene, high purity silver leads for the absolute best signal transfer, resin-sealed end caps to protect a

001-0236 | 1,50 µF | 5% | 400 V

The Cross Cap, entry-level, MKP capacitor has got the best sonic quality and the best electrical peculiarity in its price class. These capacitors uses high quality foil, produced and metalized in the EU. They do not make any unpleasant distortion on sound

LSR-270/20 | 27 Ω | 20 W | 5%

High-power cement resistor.

Electrolytic Non-Polarized Cap | 80 µF | 10% | 100V

These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 5% dissipation factor and are rated at 100V which are effective to approximately 200 watts.