Versterkermodules

DIY Stereo Case | EVAL1

AA-JA33286 | BT 5.0 | DSP | Versterker Module

JAB5 is a 4CH audio amplifier board integrated with Bluetooth 5.0 (supporting aptX HD) and ADAU1701 DSP, offering a real all-in-one audio solution for customers.

EVAL2 | Eigentakt | Mono Amplifier Kit

The EVAL2 mono evaluation kit creates easy signal and power supply connections for a mono 1ET400A setup. The kit is developed for evaluation purposes, but is perfect suitably for DIY applications

Up2Stream Mono AMP | BT 5.0 | Wi-Fi | Versterker Module

Are you working in a project in some area, commercial buildings, elevators or DIY projects that only need one speaker but with high amplification? Acrylics' Mono Amplifier can get the job done! It can output a maximum 100W in Mono channel which is perfect

TDA2822M | Low Voltage | Versterker Module

Build small, low voltage stereo audio projects with this TDA2822M mini amplifier board. It works perfect for projects that require between 5 and 9 VDC.

TDA8946 | Mic and Line inputs | Versterker Module

Make your own karaoke without breaking the bank with this TDA7946 chip amplifier board with microphone jacks.

T-Amp | Tripath TA2024 | Versterker Module

The T-Amp revolution continues here! This compact stereo amplifier based on the Tripath TA2024 chip outputs 2 x 15 watts and is perfect for building into audio projects or use as a standalone amp.

TPA3116D | Versterker Module

The TPA3116D2 2 x 50W Class-D stereo audio amplifier features high-quality sound reproduction and volume control with anti-pop on/off switch.

TPA3110D2.1 | BT 4.1 | Versterker Module

Enjoy designing your own small portable Bluetooth audio 2.1 channel DIY project with this Bluetooth 4.1 digital amplifier board. Customize the sound with built-in subwoofer, satellite, and master volume controls.

BT 3.0 | Versterker module

Enjoy creating a new wireless remote audio project with this all-in-one, easy to use 3.0 Bluetooth 2.1 channel three piece amplifier board with bass, treble, and subwoofer volume controls. It delivers 50W into stereo channels and an additional 100W into a

PAM8610 | Versterker Module

The PAM8610 20 watt Class-D audio amplifier features a DC volume control for high-quality sound reproduction.

EVAL1 | Eigentakt | Stereo Versterkerkit

The EVAL1 stereo evaluation kit creates effortless signal and power supply connections for a stereo 1ET400A setup. The kit is developed for evaluation purposes, but is perfect suitably for DIY applications.

1ET400A | Eigentakt | Versterker Module

The 1ET400A is a single-channel, ultra-high performance, analog-input Class D amplifier module capable of over 400W of power and provides an audio quality level that sets the standard for power amplifiers of any operating class.

DSPB-100 | DSP | Versterker Module

Dayton Audio DSPB-100 combines a 1 x 100W amp board with the ADAU1701 digital signal processor which enables you to customize sound using SigmaStudio software and Dayton Audio ICP1 Bluetooth programmer. Use the DSPB-100 as the heart of your DSP audio proj

DSPB-250 | DSP | Versterker Module

Dayton Audio DSPB-250 combines a 2 x 50W amp board with the ADAU1701 digital signal processor which enables you to customize sound using SigmaStudio software and Dayton Audio ICP1 Bluetooth programmer. Use the DSPB-250 as the heart of your DSP audio proje

AA-AB32256 | DAC | Versterker Module

AA-AB32256 is a digital input high performance Class D audio amplifier with integrated audio processor, based on the TAS5754 from Texas Instruments.

AA-AB32221 | Versterker Module

This 2 x 150W Class-D audio amplifier board integrates TI’s high performance TAS5613 supporting stereo channel audio amplification.

UcD400HG HxR | UcD® | Versterker Module

The UcD400HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD400HG HxR comes with the required UcD Signal Cable.

UcD180HG HxR | UcD® | Versterker Module

The UcD180HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD180HG hxR comes with the required UcD Signal Cable.

NC400 | Ncore® | Versterker Module

The NC400 amplifier module is an extremely high-quality class D power amplifier module based on NCore technology from Hypex.

KAB-100M | BT 4.0 | Versterker Module

The Dayton Audio KAB-100M Bluetooth Amplifier Board makes it quick and easy to add audio to your project, speaker build, point-of-purchase display, kiosk, or any location where music or sound enhances the experience. With an output of 1 x 100 watts, there

TPA3116D2.1-BT | BT 5.0 | Versterker Module

Enjoy creating new audio projects with this all-in-one, easy to use 5.0 Bluetooth 2.1 channel small amplifier board with bass, treble, and variable low pass filter controls. Its delivers 50W into stereo channels and an additional 100W into a mono subwoofe

TPA3116D2.1 | Versterker Module

This easy-to-use 2.1 amplifier board is big on power, delivering 50 watts into stereo channels and an additional 100 watts into a mono subwoofer channel. Use this board for multimedia sound systems, boom box projects, digital signage, or even mobile audio

TPA3116D2 | Versterker Module

The TPA3116D2 2 x 50W Class-D stereo audio amplifier features high-quality sound reproduction with volume, bass, and treble controls. Its tiny footprint enables you to create miniature audio products with big sound capabilities.