Nog geen account? Account aanmaken
Uw winkelwagen is leeg
SMPS3kA400 2 x 65 VDC 3000 Watt Switch Mode Power Supply is specially designed to be used in combination with multiple UcD400HG, UcD400HG HxR or NC400 modules. This SMPS comes with the required Hypex Cable Set SMPS3k.
SMPS1200A700 2 x 85 VDC 1200 Watt Switch Mode Power Supply is specially designed to be used in combination with the UcD700HG HxR module. This SMPS comes with the required Hypex Cable Set SMPS1200.
SMPS1200A180 2 x 46 VDC 1200 Watt Switch Mode Power Supply is specially designed to be used in combination with multiple UcD180HG and UcD180HG HxR modules. This SMPS comes with the required Hypex Cable Set SMPS1200.
SMPS400A400 2 x 62 VDC 400 Watt Switch Mode Power Supply is specially designed to be used in combination with the UcD400 module. This SMPS comes with the required Hypex Cable Set SMPS400.
SMPS400A180 2 x 46 VDC 400 Watt Switch Mode Power Supply is specially designed to be used in combination with the UcD180 module. This SMPS comes with the required Hypex Cable Set SMPS400.
The FA253 2x250 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.
The FA252 2x250 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.
The UcD700HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD700HG HxR comes with the required UcD Signal Cable.
The UcD180HG amplifier module is an entry level high-end class D amplifier from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD180HG comes with the required UcD Signal Cable.
Build your own high-quality class D amplifier based on the Ncore technology from Hypex. The NC400 monoblock kit is probably the best and most easy way to get a high-end HiFi system in your living room.
This new 16 ohm 12″ woofer from SB Acoustic features a low distortion motor system, paper cone with rubber surround, cast Aluminum frame and 75mm voice coil. The woofer would make a fine low frequency driver for a premium 3-way system, or put two in paral
The SB Acoustics SB65WBAC25-4 is a high-tech little full-range driver, jam-packed with nice features to further improve performance.
The SB Acoustics SB10PGC21-4 is a nice contestant for your next FAST, portable speaker or tiny satellite build. It sports a highly optimized design with a stylish fiber glass cone, vented voice coil and low damping suspension ensuring good dynamics with l
In-house made mineral filled PP-cone. Low damping rubber surround for improved transient response. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and extra rigidity. Shorting copper cap on
50 mm (2") High-End fabric dome driver for the midrange band between 800 and 7000 Hz.
50 mm (2") High-End titanium mid-dome for the midrange band between 800 and 5000 Hz.
5.8 cm (2.3") Full-range speaker with coated paper cone and rubber surround to achieve an IP64 rating, making this driver suitable for outdoor use.
5.8 cm (2.3") Full-range speaker with coated paper cone and rubber surround to achieve an IP64 rating, making this driver suitable for outdoor use.
20 cm (8") High-end full-range loudspeaker with lightweight paper cone and fabric surround.
10 cm (4") high-end full-range loudspeaker with excellent balanced response characteristics and slightly increasing high-range for a pleasant sound even outside of 0-axis.
20 cm (8") HiFi woofer with strong drive, extended rear pole plate and 35 mm voice-coil for high power handling.
20 cm (8") woofer with very good price/performance ratio.
20 cm (8") woofer with very good price/performance ratio.
30 cm (12") high-end woofer with a black cellulose diaphragm, large-format magnet arrangement and a massive aluminum diecast basket.
