Übersicht

DNR-0.33 | 0.33 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are used in Zobel networks and fixed L-Pad attenuator circuits for tweeters. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perf

CAP-100-STDR-22U-500V | 22 µF | 20% | 500 V

CAP-100-STDR-50U-500V | 50 µF | 20% | 500 V

CAP-100-STDR-68U-500V | 68 µF | 20% | 500 V

DNR-6.0 | 6.0 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform

DNR-5.6 | 5.6 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform

DNR-4.3 | 4.3 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform

DNR-2.4 | 2.4 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform

PMPC-20 | 20 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

PMPC-15 | 15 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

PMPC-6.8 | 6,8 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

PMPC-3.0 | 3,0 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

RES-NM35-1W-8K2 | 8,2 kΩ | 1 W | 1%

XA261 Power Transformer Tube Amplifier 121 VA

XN1887 Power Transformer Tube Amplifier 210 VA

MZF-8513/SW Metal Corner 2 Legs

Black metal corner for speaker cabinets. Black ball corner, lacquered, 2 legs, 1 mm steel. For right-angle and trapezoid speaker cabinets. Mounting on two points with MZF-4012 screws or 3.2 mm rivets.

Designer DSA175-PR Passivradiator

The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. Built to be a perfect match for the Designer Series drivers, these passive radiators feature the same steel frame,

Designer DS115-PR Passivradiator

The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. Built to be a perfect match for the Designer Series drivers, these passive radiators feature the same steel frame,

DC130BS-8 Tiefmitteltöner

Choose the Dayton Audio DC130BS-8 Classic Series 5-1/4" shielded woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer.

Prestige CA15RLY - H1216-08 Tiefmitteltöner

This 5" cone driver, developed for use as a long throw high fidelity woofer or woofer/midrange unit. Classical coated paper cone that gives a smooth extended frequency response with a controlled roll off.

Low-Pass Filter | 500 - 6,000 Options | 8 Ohm

This 2nd order (i.e. 12 dB per octave) low pass Linkwitz-Riley filter from Dayton Audio passes frequencies below the given frequency and can easily be combined with other filters in this series to create 2-way or even 3-way crossover networks. Designed fo

CF16-20 | 0.20 mH | 0.14 Ω | 3% | 16 AWG

Dayton Audio 16 gauge copper foil inductors are for those of us who demand the very best in audio components. Copper foil inductors offer better heat dissipation, reduced voltage stress, and greater mechanical strength than round-wire inductors.

DNR-6.5 | 6.5 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform

DNR-4.7 | 4.7 Ω | 10 W | 2%

Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform