Übersicht

PMPC-25 | 25 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

PMPC-8.2 | 8,2 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

PMPC-5.6 | 5,6 µF | 1% | 250 V

These capacitors offer excellent build quality, long-term reliability, and astonishing sonic clarity, all at a 1% tolerance for improved stereo matching between speakers.

40-100 µF / 5% / 250V Polypropylene Capacitor

Make the Dayton Audio line of metallized polypropylene capacitors your standard choice for all of your loudspeaker projects! The same high quality as the competing brands ... but at a much lower price. They are suitable for a wide range of applications.

Prestige 27TDFC/TV - H1210-06 Kalotten-Hochtöner

The 27TDFC/TV is a High Definition precoated fabric dome tweeter with a wide, soft polymer surround and a shielded magnet system with a rear chamber. Sonotex precoated fabric diaphragm with high consistency and excellent stability against variations in ai

RES-NM30-1W-15R | 15 Ω | 1 W | 1%

Zinc Fender Washers | 6.35 mm x 25.4 mm

These oversize zinc washers work perfect with nuts and bolts with heads larger than 6.4 mm to fill holes smaller than 25.4 mm. They also work for adding mass to passive radiators to attain target tuning frequencies.

Flat Washer Zinc | #4-40

#4-40 flat washer, perfect for installing Neutrik, Switchcraft (EH style), Amphenol and other connectors in rack panels, cabinets, and more.

Jack-Jack Single-Shielded Kabel

3.5 mm Jack-Jack cable available in various lengths.

High-Pass Filter | 3,000 Hz | 8 Ohm

This crossover is ideal for use in small 2-way surround sound speakers. There is no low pass filter section so the woofer will reproduce its full response width. 12 dB per octave high pass filter with a 3,000 Hz crossover point.

001-0650 | 2,70 µF | 2% | 800 V

Jantzen Audio Silver capacitors are possibly the most detailed caps on the market. These caps are constructed of a specially wound metallized polypropylene, high purity silver leads for the absolute best signal transfer, resin-sealed end caps to protect a

002-0199 | 4,70 Ω | 10 W | 1%

The Superes resistors are Jantzen’s top-of-the-line resistors. Perfect for high-end crossover application. The premium choice for both speaker manufacturers and DIY enthusiasts.

001-7060 | 10 µF | 3% | 100 V

The Alumen Z-Cap (pure aluminium foil capacitors) was especially designed for the tweeter and mid-section of crossovers for passive hi-fi speakers.

001-0588 | 18 µF | 2% | 800 V

With the Superior Z-Cap even the finest nuances can be heard. The sound never gets over-edged, superb naturalness with a somewhat bright top-end.

ME-3,30T3.450 | 3,30 µF | 3% | 450 V

The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the thickest possible aluminium layer, then wound prec

ME-0,47T3.450 | 0,47 µF | 3% | 450 V

The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the thickest possible aluminium layer, then wound prec

MCAP630-10 | 10 µF | 3% | 630 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP400-1,50 | 1,50 µF | 3% | 400 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP250-100 | 100 µF | 5% | 250 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP250-68 | 68 µF | 5% | 250 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP250-47 | 47 µF | 5% | 250 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP250-33 | 33 µF | 5% | 250 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP250-22 | 22 µF | 5% | 250 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective

MCAP250-18 | 18 µF | 5% | 250 V

The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective