Noch keinen Account? Benutzerkonto anlegen
Ihr Warenkorb ist leer
The 3/4" tweeters D2008 and D2010 are among the many highly praised designs in Classic series. They have enjoyed success for more than 35 years. And are still among the best tweeters available.
Dayton Audio raised the bar with the Epique E220CF-8 8" woofer. Constructed of high-end materials like a damped carbon fiber cone, titanium former, and huge neodymium magnet, this driver produces natural sound with remarkably low distortion. In addition,
Dayton Audio raised the bar with the Epique E160CF-8 5-1/4" woofer. Constructed of high-end materials like a damped carbon fiber cone, titanium former, and huge neodymium magnet, this driver produces natural sound with remarkably low distortion. In additi
Tang Band's acoustically matched RT-2202S ribbon tweeter pair uses an extremely lightweight aluminum diaphragm to provide incredible detail and unmatched transient response. With extremely smooth response up to 30,000 Hz, tweeter is exceptionally easy to
The Scan-speak R2904-700000 tweeter is the new flagship tweeter in the Scan-speak line. This tweeter incorporates many innovative design concepts. The first notable difference is the use of a phase plug. The dome is attached to the phase plug, so the radi
The D2908/714000 is a highly efficient and high-power 8 ohm 1" beryllium dome tweeter, it reproduces music clean and clear at all listening levels with dynamic precision and a superb vocal rendition as when recorded.
The Scan-speak D2905-990000 is our state of the art tweeter. This "revelation" is a 1" textile dome tweeter that will reach new borders within high-end loudspeaker drive units. The new magnet system with SD caps and rings that eliminate the electrical pha
The Scan-speak D2904-710002 tweeter is a 1" soft dome with wide surround, using the same chambering as the Ring Radiator.
The carefully designed dome and surround result in a linear response and an exceptionally good off axis response. Note the smooth rol
The Scan-speak D2904-710002 tweeter is a 1" soft dome with wide surround, using the same chambering as the Ring Radiator.
The carefully designed dome and surround result in a linear response and an exceptionally good off axis response. Note the smooth rol
The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion. The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.
This tweeter features a 99% pure Beryllium dome diaphragm. The large roll surround and Beryllium dome diaphragm provide a flat frequency response to above 40KHz with outstanding off-axis dispersion and a silky-smooth sound.
This 1” compact Illuminator beryllium tweeter is an example of a big sound in a small body. As beryllium is a material characterized by great stiffness, light weight and high damping, the beryllium diaphragm offers all the properties required to reproduce
The compact size is one of the key elements of these Illuminator tweeters, which provides a high degree of flexibility within design options. The small size is employed without compromising sound quality where these compact tweeters are fully comparable t
D3004-602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces. The back chamber is die cast in aluminum and designed with a contoured shape that functions as a heat sink in high p
The compact size is one of the key elements of these Illuminator tweeters, which provides a high degree of flexibility within design options. The small size is employed without compromising sound quality where these compact tweeters are fully comparable t
With the Ellipticor family a long tradition of circular motor structures and their inherent breakup behavior has been broken since one of its key features is an elliptical voice coil and magnet gap. In combination with the powerful SD AirCirc magnet syste
With the Ellipticor family and introduction of an elliptical voice coil and magnet gap, a long tradition of circular motor structures and their inherent breakup behavior has been broken. In combination with the powerful SD AirCirc magnet system, the 18WE
Manually coated paper cone and mechanically matching natural rubber surround result in an unusually smooth midrange response. 1” high temperature voice coil is wound on an aluminum voice coil former to ensure a very high power handling capacity.
The MU10RB is a 4” midrange driver offering an extraordinary performance and sound clarity. New Curv cone, a woven polypropylene with excellent internal damping together with perfectly matched moving parts gives a smooth, extended frequency response.
Extremely stiff aluminum cone gives tremendous bass precision. The cone and the low loss rubber surround show no sign of the familiar cone edge resonance and distortion associated with soft cones.
Classical handcoated paper cone and matching natural rubber surround produce a well behaved roll off characteristic and reduce potential resonance problems. Long, high temperature voice coil wound on an aluminum voice coil former gives low distortion and
Extremely stiff aluminum cone gives tremendous bass precision. The cone and the low loss rubber surround show no sign of the familiar 500-1500 Hz cone edge resonance and distortion associated with soft cones.
The U18RNX/P is a 6.5” High Fidelity woofer with an injection molded metal chassis, intended for bass reflex and transmission line designs. New Curv cone, a woven polypropylene with excellent internal damping together with perfectly matched moving parts g
6,5" High Fidelity cone driver, developed for use as a high quality woofer or woofer/midrange unit. Classical coated paper cone gives a smooth extended frequency response with a controlled roll off.
