Noch keinen Account? Benutzerkonto anlegen
Ihr Warenkorb ist leer
Tectonic Elements TEAX32C30-4/B 32 mm balanced exciter was originally designed for automotive applications where its rugged design would allow it to pass the requirements for automobiles. It is specially balanced so that when applied to vertical surfaces
Tectonic Elements 32 mm TEAX32C20-8 balanced exciter was originally designed for automotive applications where its rugged design would allow it to pass the requirements for automobiles. It is specially balanced so that when applied to vertical surfaces th
Tectonic's TEAX25C10-8/SP Frog Exciter turns virtually any solid object into a speaker, when attached, by vibrating it at speeds of up to 20,000 cycles per second. The vibrations modulate the air, which is then decoded by the brain as sound. Test the limi
Tectonic Elements 19 mm TEAX19C01-8 exciter continues their tradition of making magical devices (Distributed Mode Loudspeakers) that turn virtually any surface into a high fidelity loudspeaker. The exciter's small size enables audio reproduction in applic
Designed to be used with tablet PCs, eBooks, and appliance control panels, the bending waves generated by the TEAX14C02-8 brings life to devices. Adhesive is pre-applied for permanent device attachment, and the 9.55 mm (3/8") thickness is enhanced by a ne
A great low-cost driver designed for use in small stage monitors, either as a replacement driver or for new construction. The broad frequency coverage and flat midrange ensure that vocals and instruments will sound just like they should.
The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.
This driver is built similarly to the active woofer and is a good match to the SB29SWNRX-S75 10" subwoofer. In 0.75 to 1.0 cubic foot with that woofer one has an F3 of about 35Hz. It also mates well with the SB29NRX75-6 10" woofer.
The SB Acoustics 10" passive radiator SW26DBAC-00 produces some very good results thanks to its main components: dual rigid aluminum cone structure and cast aluminum chassis that allows optimum strength.
SB Acoustics has made its new 10" passive radiator, the SW26DAC-00 to match their already active SW26DAC76 woofers. Simulating them in BassBox Pro produces some very good looking results.
With a racetrack design, the SB Acoustics SB15SFCR-00 is a 5" X 8" passive radiator with a made in-house hard paper cone. Its components also include a low damping rubber surround, symmetric suspension as well as an easily adjustable moving mass.
The SB Acoustics SB20PFC30-8 is an 8" papyrus fiber paper cone woofer with a great value for its build quality and performance. Its components make it a good choice for many different enclosure types.
The SB Acoustics SB20PFC30-4 is an 8" papyrus fiber paper cone woofer with a great value for its build quality and performance. Its components make it a good choice for many different enclosure types.
The SB Acoustics SB16PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB16PFC25-8 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB16PFC25-4 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB13PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB13PFC25-8 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB13PFC25-4 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB12PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
The SB Acoustics SB12PFC25-8 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The butyl rubber surround allows a smooth frequency response while its vented motor system provides low comp
The SB Acoustics SB12PFC25-4 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The butyl rubber surround allows a smooth frequency response while its vented motor system provides low comp
The SB Acoustics SB23NBACS45-8 features a soft low damping rubber surround for improved transient response and a geometrically reinforced aluminum cone for improved break-up control. Shorting ring in motor system for reduced distortion and vented pole pie
The SB Acoustics SB23NBACS45-4 features a soft low damping rubber surround for improved transient response and a geometrically reinforced aluminum cone for improved break-up control. Shorting ring in motor system for reduced distortion and vented pole pie
