Noch keinen Account? Benutzerkonto anlegen
Ihr Warenkorb ist leer
The CHN70 is a Full Range design for use in many audio applications. Designed by Mark Fenlon and Evan Yu for use by audio end-users who want a high performance driver at a lower cost.
The Pluvia 11 is a completely new driver design. It is the first “full range” driver that can handle bass loads typically delivered by 5.5 inch to 6.5 inch mid-bass units used in most 2 way systems.
The Pluvia Seven driver is a new type of small driver from MarkAudio. While it's mechanically similar to the CHR-70 series drivers, its major design features are more advanced.
The Pluvia Seven driver is a new type of small driver from MarkAudio. While it's mechanically similar to the CHR-70 series drivers, its major design features are more advanced.
W2-2243S 2" Aluminum/Magnesium Full Range Driver
The Alpair 7A Gen. 3 represents a large step forward in the design and production of “extended” full range audio drivers. In its size class, this Alpair 7 currently delivers the widest frequency range. The usable range now extents to 32-kHz above 80dB, wh
This Alpair 10 Gen. 3 is the latest model in a development line designed to extend the performance of mid-sized Markaudio full-range emitters. This generation of Alpair 10 utilizes a new ultra-thin wall coil.
The Alpair 12P is the largest full-range driver produced by Markaudio. This driver is a development unit following on from the original metal coned Alpair 12 produced in 2009/2010. Several major design changes make this Alpair radically different from the
This Alpair 10 Gen. 3 is the latest model in a development line designed to extend the performance of mid-sized Markaudio full-range emitters. This generation of Alpair 10 utilizes a new ultra-thin wall coil.
The Alpair 7A Gen. 3 represents a large step forward in the design and production of “extended” full range audio drivers. In its size class, this Alpair 7 currently delivers the widest frequency range. The usable range now extents to 32-kHz above 80dB, wh
The Alpair 6M is well suited to smaller audio applications, particularly desk-top and nearfield uses. The bass-rich warm tone of this driver can act a balance for those installations using compressed or highly processed source music, complements the use o
Magnesium/aluminum alloy concave cones and square frames are the distinguishing features of the BS series. The B3S 3" full-range speaker's magnetically shielded design allows use in center channel and other multimedia applications.
For use in compact high output, low distortion subwoofer designs, the 10" Peerless SDF-250F75PR01-06 subwoofer will deliver outstanding performance. Designed to handle power with its 3" voice coil and extensive venting, this driver also includes an advanc
The SDS-135F25CP02-04 5-1/4" subwoofer from Peerless is perfect for adding powerful bass performance to portable speaker designs or small 2.1 systems. This high excursion driver is designed to excel in small enclosures.
This woofer has high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spider. Powerful neodymium magnet system, delivering higher magnetic flux and resulting in a low resonance frequency and Qts point.
The CAW 538 has reinforced ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points.
This woofer features an aerodynamic Uniflow™ open chassis, large diameter spider, reinforced ferrite magnets resulting in higher power handling, and low resonance frequency and Qts points.
Morel Elite Series 6" woofers feature large diameter voice coils, open yet strong frames, advanced composite cones, and carefully engineered magnetic circuits.
To create their Titanium Ultimate high fidelity 10" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former.
The 6" TiW 638Ft features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
The 6" TiW 634Ft features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
A great low-cost driver designed for use in small stage monitors, either as a replacement driver or for new construction. The broad frequency coverage and flat midrange ensure that vocals and instruments will sound just like they should.
The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.
This driver is built similarly to the active woofer and is a good match to the SB29SWNRX-S75 10" subwoofer. In 0.75 to 1.0 cubic foot with that woofer one has an F3 of about 35Hz. It also mates well with the SB29NRX75-6 10" woofer.
