Noch keinen Account? Benutzerkonto anlegen
Ihr Warenkorb ist leer
For high-load applications, wire-wound cement resistors with a continuous load capacity of 25 watt are a great option.
For high-load applications, wire-wound cement resistors with a continuous load capacity of 25 watt are a great option.
The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the thickest possible aluminium layer, then wound prec
The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective
MCoil Foil coils are wound layer by layer and are of particularly low-capacitive, even though their similarity to our foil wound capacitors would suggest otherwise.
Dayton Audio 20 gauge air core inductors are a great choice and the best value for building high quality crossovers. Features fully annealed refined copper wire, perfect layer windings and air core construction to ensure no hysteresis and saturation disto
Dayton Audio 20 gauge air core inductors are a great choice and the best value for building high quality crossovers. Features fully annealed refined copper wire, perfect layer windings and air core construction to ensure no hysteresis and saturation disto
Dayton Audio 18 gauge iron core inductors are the most cost effective choice when large inductance values are needed for subwoofer crossovers. Features fully annealed refined copper wire with baked enamel insulation, wrapped around a laminated iron core.
Dayton Audio DNR Series "Audio Grade" resistors are primarily used in Zobel networks and fixed L-Pad attenuator circuits. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise perform
The Lepai LP210PA is the ideal Class D plate amplifier for powering smaller 2.1 speaker systems. This compact plate amplifier can provide 30 watts x 2 to the full range outputs and 60 watt to the mono subwoofer channel for powerful output capability. The
Dayton Audio's DMA105-4 4" high performance full-range driver combines a rigid aluminum cone, powerful dual magnet neodymium motor, and a proprietary open frame to create a state of the art speaker that delivers low distortion, natural response, and amazi
The Dayton Audio MKSX4 low profile passive subwoofer is the perfect solution for your small 2.1 system. Combine with the Dayton Audio MK402 and the DTA-2.1BT2 amplifier for a timbre matched Hi-Fi system.
The ultra-convenient SMSL AD13 stereo amplifier has an array of features like Bluetooth connectivity, a USB DAC, and included wireless remote control. Use this compact amp to power small to medium sized speakers at 30 watts per channel.
Create a textured finish when applying DuraTex with this 4" textured roller and handle.
Protect wood speaker cabinets and road cases with Acry-Tech's #1 cabinet coating...DuraTex! It dries to the touch in under three hours, creating a beautiful, weather-resistant finish.
Protect wood speaker cabinets and road cases with Acry-Tech's #1 cabinet coating...DuraTex! It dries to the touch in under three hours, creating a beautiful, weather-resistant finish.
The Dayton Audio CE30P-4 features a paper cone, round plastic frame, rubber surround, and powerful neodymium motor structure, for small devices and projects that require big sound from a small driver. 4-ohm impedance.
Black plastic enclosed ferrite core for AC power cords. Easy to install, simply snap it around the cord.
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 1" shaft l
Audio taper 1/4 watt stereo potentiometer with M8 x 6.5 mm L bushing.
With high excursion capabilities and low Fs, Dayton Audio's TCP115-8 can produce a surprising amount of bass for a 4" woofer. In addition to its low frequency performance, this driver also performs very well through the midrange, making this driver ideal
The Dayton Audio compact NHP25Ti-4 1" titanium dome tweeter uses a high temperature neodymium motor, Ferrofluid cooling, and rear mounted heatsink for improved heat dissipation making this tweeter suitable for higher output systems and even professional l
The Alpair 5 Generation 3 is a pure Free-to-air Single Suspension Full-Range audio driver. The new 5 operates only using its all-new single front suspension.
The Pluvia 11 is a completely new driver design. It is the first “full range” driver that can handle bass loads typically delivered by 5.5 inch to 6.5 inch mid-bass units used in most 2 way systems.
