Improve the stability of your speakers while giving them a modern and professional look with Dayton Audio's OS-2S steel spiked outrigger set. Constructed of 4 mm thick steel, these 11-3/4" wide spiked outriggers have a durable black powder coated finish.
This 381 x 558.8 mm formed metal grill has an 8 mm hole pattern, and comes packaged as a pair. Our formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets.
This 304.8 x 457.2 mm formed metal grill has an 8 mm hole pattern, and comes packaged as a pair. Our formed metal grills protect your speakers with the same style and strength as the grills on expensive pro PA cabinets.
Don't throw away expensive loudspeakers just because the foam surround has dry rotted, or has been punctured. With these new refoam kits from Parts Express, you can save BIG bucks by repairing the foam surround and avoid costly loudspeaker replacements.
Don't throw away expensive loudspeakers just because the foam surround has dry rotted, or has been punctured. With these new refoam kits from Parts Express, you can save BIG bucks by repairing the foam surround and avoid costly loudspeaker replacements.
Square recessed panel with satin nickel plated post and knurled knobs. Color coded. Accepts up to 8 gauge wire. Can also be used with dual banana plugs.
Quick release, spring loaded terminal. Pressfit design for easy installation. Accepts up to 12 gauge wire. Overall size: 56 mm x 56 mm; cutout: Ø 48 mm round. Includes gasket.
This crossover is ideal for use in small 2-way surround sound speakers. There is no low pass filter section so the woofer will reproduce its full response width. 12 dB per octave high pass filter with a 5,000 Hz crossover point.
High quality, gold plated solderless terminals for speaker and power connections on high power home and car audio applications.
Rectangular recessed panel with high power, gold plated 5-way binding posts, which are insulated to prevent shorts. Accepts up to 8 gauge wire. Standard spacing for use with dual banana plugs. Overall size: 92 mm x 79 mm; cutout: 72 mm x 54 mm. Includes g
4-1/8" diameter, natural aluminum inside, 3/32" vertical lip replacement aluminum dust caps for PA and guitar speakers.
Round recessed panel with satin nickel plated post and knurled knobs. Color coded. Accepts up to 8 gauge wire. Can also be used with dual banana plugs.
This nominal 132 mm by 183 mm blank input cup provides plenty of space for accepting different styles of input, anything from 1/4" jacks to European spaced binding posts.
4 output, quick release spring loaded speaker terminal. Right/left identification. Accepts up to 12 gauge wire. Outer dimensions: 70 mm W x 24 mm H.
Rectangular terminal with binding posts. Includes gasket for a leak free seal. Color coded. Accepts up to 10-12 gauge wire. Also can be used with dual banana plugs. Dimensions: 54 x 24 mm.
For use with any standard 3/8" shaft L-Pads, this faceplate and knob set provides the finishing touch. Replace lost or damaged knob and faceplate set. Faceplate diameter is 3-1/8".
Recessed "L" pad housing for flush mounting "L" pads in custom speaker cabinets. Knob included. 2-5/8" x 2-5/8" x 1". For use with any standard 3/8" shaft diameter L-pad.
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaf
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 16 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 16 ohm loads, features a 3/8" sha
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance at a constant 16 ohm load. This 100 watt RMS L-pad is designed to be used with 16 ohm loads, features a 3/8" shaft length,
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 15 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft
Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.).
Milled from solid brass, with a 24 karat gold plating for maximum signal transfer, BFA style banana plugs are built with a polycarbonate shell to provide protection from unintended contact and accept up to 8 AWG wire.
Designed with speaker builders in mind, these white cloverleaf pitches boards are perfect for passive crossover designs. The cloverleaf pitches allows for fast & easy connections.
