Mount your computer monitor up to 13.2 lbs., and 27" with the Dayton Audio Shadow Mount AMM2. The innovative gas mount suspension arm provides smooth tilt, pan and swivel adjustments to achieve your optimal viewing angle, and the cable management system k
2x250W @ 4Ω or 1 x 500W @ 8Ω DSP plate amplifier, Powered by ICEpower® 250ASX2 module, Ethernet control, FIR + IIR filter
2x125W @ 4Ω or 1 x 450W @ 4Ω DSP plate amplifier, Powered by ICEpower® 125ASX2 module, Ethernet control, FIR + IIR filters
USBStreamer module in an aluminum enclosure. Operates as USB to Toslink (Stereo up to 192k) or USB to ADAT(up to 8channels at 48/44.1kHz)
USBStreamer is a native 24/192kHz multi-channel (10x10) USB audio to Toslink/I2S/ADAT interface.
nanoDIGI 2x8 all digital DSP with SPDIF/Toslink input and SPDIF outputs for up to 8 x Output channels.
MiniDSP Balanced 2x4, a low cost Digital Signal Processor for audio applications. Balanced in/out in a tiny form factor.
MiniDSP 2x4, a low cost Digital Signal Processor for audio applications. Great sound in a tiny package.
nanoDIGI all digital DSP configuration for up to 2xIN, 8xOUT
The Sure Electronics AA-JA31181 1x 100 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-100 an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board.
The Sure Electronics AA-JA31211 1 x 60 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-60 an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board.
The Sure Electronics AA-JA32473 2 x 30 Watt Class D Audio Amplifier Board with Audio DSP - JAB3-30 is an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board.
The Sure Electronics AA-JA32472 2 x 30 Watt 8 Ohm Class D Audio Amplifier Board BT 4.0 APT-X - JAB2-30 is an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board with enough power to drive s
The Sure Electronics 2 x 15 Watt 8 Ohm Class D Audio Amplifier with Bluetooth 2.1 – JAB1 is an amplifier board easily built in to any project, speaker build or other DIY project in need of a small amplifier board with enough power to drive stereo speakers
This is the upgraded version of the original 2 X 300 watt TAS5630 class D audio amplifier board.
This amplifier board supports stereo amplification by using two channel PBTL topology. By means of dedicated heat sink design with temperature controlled fan,
If you absolutely have to have 500 clean watts of stereo power, look no further than this amplifier board. It employs IR's High Voltage, high performance class D audio amplifier driver IRS2092SPBF
and 200V Single N-Channel HEXFET Power MOSFET IRFB4227. T
This Sure Electronics audio amplifier board integrates IR's High Voltage, high performance class D audio amplifier driver IRS2092SPBF and 200V Single N-Channel HEXFET Power MOSFET IRFB4227 to deliver 750 watt of power. This amplifier board supports mono a
If you absolutely have to have 500 clean watts of stereo power, look no further than this amplifier board. It integrates high performance class D audio amplifier driver IRS2092SPBF and 200V Single N-Channel HEXFET Power MOSFET IRFB4227 by using one channe
3,000 watts of clean monoblock power are available with this amplifier board. It integrates high performance IRS2092 and 200V Single N-Channel HEXFET Power MOSFET IRFB4227 supporting single channel audio amplification by using one channel half bridge topo
2,000 watts of clean monoblock power are available with this amplifier board. It integrates high performance IRS2092 and 200V Single N-Channel HEXFET Power MOSFET IRFB4227 supporting single channel audio amplification by using one channel half bridge topo
Get control of your volume with the AA-AB41134 digital controlled stereo electronic volume control. Works with any audio project that has line input capability.
This 2 x 125 Watt Class D Audio Amplifier Board - IRS2092 integrates high performance IRS2092 supporting dual channel audio amplification. Both of channels are capable of outputting nominal power simultaneously and continuously. It’s suitable for amplifie
1,500 watts of clean monoblock power are available with this amplifier board. It integrates high performance IRS2092 and IR MOSFET IRFB4227 supporting single channel audio amplification.
Design your own powered subwoofer, powered speaker or audio amplifier with Sure's 2 x 400 watt stereo amp board. It's ready to handle mid power demanding audio projects.
