These banana plugs accept a wide range of wire diameters to suit the needs of your system. A small screwdriver is the only extra tool you need for terminating the wires; no crimping and no soldering.
Milled from solid brass, with a 24 karat gold plating for maximum signal transfer, these 1/4" to 3/8" forked spade connectors feature a carbon fiber wrapped shell to provide protection from unintended contact while accepting up to 8 AWG wire.
Dayton Audio's DTA-1 mini amplifier has the heart of a serious performer, in a truly portable package. The DTA-1's Class-T output chip produces imaging, dynamics, and sound quality that rival esoteric tube amps—up to 15 watts per channel is on tap to push
This is the upgraded version of the original 2 X 300 watt TAS5630 class D audio amplifier board.
This amplifier board supports stereo amplification by using two channel PBTL topology. By means of dedicated heat sink design with temperature controlled fan,
The FA251 250 Watt FusionAmp is a DSP controlled plate amplifier. It can be the basis of a powerful active subwoofer or an active one-way monitor.
20 cm (8") High-end full-range loudspeaker with lightweight paper cone and fabric surround.
The GRS 8SW-4 8" 4 ohm poly cone driver is a true bargain in replacement subwoofers! This economical sub features a large diameter voice coil, durable polypropylene cone, and extended excursion for high energy bass reproduction.
GRS' 6-1/2" round automotive speaker is a perfect choice for replacing blown, aging, or damaged original-equipment speakers in your car or truck. Features a dual cone design for durability and wide range audio reproduction.
GRS' 5-1/4" round automotive speaker is a perfect choice for replacing blown, aging, or damaged original-equipment speakers in your car or truck. Features a dual cone design for durability and wide range audio reproduction.
GRS' 4" square frame automotive speaker is a perfect choice for replacing blown, aging, or damaged original-equipment speakers in your car or truck. Features a dual cone design for durability and wide range audio reproduction.
GRS' 3-1/2" round automotive speaker is a perfect choice for replacing blown, aging, or damaged original-equipment speakers in your car or truck. Features a dual cone design for durability and wide range audio reproduction.
The GRS 8PR-8 8" woofer features a polypropylene cone and a rubber surround. It performs admirably in sealed-box speaker applications.
This driver's parameters were carefully optimized to match the performance of the classic Bose® 901® loudspeaker systems. Individually or in multiples, replacing your legendary but aging speakers has never been easier—or achieved better results.
The Pluvia Seven driver is a new type of small driver from MarkAudio. While it's mechanically similar to the CHR-70 series drivers, its major design features are more advanced.
No compromise 2" treated soft dome midrange designed for high end multiple speaker systems. It employs a powerful neodymium magnet (22 times stronger than ferrite!) enabling this unit to be both compact and ultra-lightweight.
This woofer features an aerodynamic Uniflow™ open chassis, large diameter spider, reinforced ferrite magnets resulting in higher power handling, and low resonance frequency and Qts points.
Morel Elite Coppersleeve Series woofers feature large diameter voice coils, open yet strong frames, advanced composite cones, and carefully engineered magnetic circuits.
A unique 4" unit that incorporates a damped polymer composite cone, 2-1/8" Hexatech™ aluminum voice coil, neodymium magnet system, high power handling, and a smooth response up to 5kHz.
Morel's SCM634 Supreme Coppersleeve Midrange neodymium/ferrite hybrid motor structure is combined with a cutting-edge cast alloy chassis for maximum performance.
The Morel Supreme Series SCW636 woofer features a 16 mm long, 3" diameter Hexatech voice coil that provides plenty of deep bass punch, and a copper-covered pole piece design reduces inductance.
To create their Titanium Ultimate high fidelity 10" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former.
To create their Titanium Ultimate high fidelity 12" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former. Moving this beast requires huge amounts of magnetic force, so to do so Morel us
The 6" TSCW 636 features an underhung 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response, a Uniflow chassis for reduced power compression, and a copper-sleeved pole piece for reduced inductance.
The 6" TiW 638Ft features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
