Create an invisible speaker with Visaton's EX 60 S high power exciter. The large flat mounting plate makes it easy to attach this exciter to almost any surface using screws, glue, or double sided tape.
Tectonic Elements 32 mm TEAX32C20-8 balanced exciter was originally designed for automotive applications where its rugged design would allow it to pass the requirements for automobiles. It is specially balanced so that when applied to vertical surfaces th
Tectonic's TEAX25C10-8/SP Frog Exciter turns virtually any solid object into a speaker, when attached, by vibrating it at speeds of up to 20,000 cycles per second. The vibrations modulate the air, which is then decoded by the brain as sound. Test the limi
The Discovery tweeter uses a very light, low mass “soft dome" with high internal damping, and a highly-optimized, low-compression magnet system, which was designed especially for the low mass dome. The result is a driver that has both good sensitivity and
The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - it gives our customers the possibility of acquiring a tailor-m
The Symmetric Drive (SD-1) concept with copper in the magnet system was invented by Scan-Speak. High-quality magnet system design has thus been a key feature of Scan-Speak design since the company’s inception.
The 21W/8555-10 is a mechanically upgraded version of 21W/8555-00, its major change is the a alu chassis, that maintain same shape, dimensions and visual appearance. The patented Symmetric Drive (SD-1) concept with copper in the magnet system and carbon f
The 3/4" tweeters D2008 and D2010 are among the many highly praised designs in Classic series. They have enjoyed success for more than 35 years. And are still among the best tweeters available.
The Scan-speak 18W/8531G-00 is a 7" Revelator mid/woofer. It features a non-resonant cone and dust cap structure, dynamic linear suspension, SD-1 magnet system, “Grasshopper" cast chassis with maximized air flow and resonance terminating mounting system.
The 18W/4531G01 features a non-resonant cone and dust cap structure, dynamic linear suspension, SD-1 magnet system, "Grasshopper" cast chassis with maximized air flow and resonance terminating mounting system. Less resonance in all structures, lower compr
The Scan-speak 15W/4531G-00 is a 5-1/4" Revelator mid/woofer. It features a slit-paper uncoated non-resonant cone and dust cap structure, dynamic linear suspension, SD-1 magnet system, "Grasshopper" cast chassis with maximized air flow, glass fiber voice
The Revelator 12M-4631G00 midrange is well known for its sliced paper cone technology. The slices are filled with damping glue, which dramatically reduces break-up modes in the diaphragm. In combination with Scan-Speaks low-loss linear suspension it repre
The D2908/714000 is a highly efficient and high-power 8 ohm 1" beryllium dome tweeter, it reproduces music clean and clear at all listening levels with dynamic precision and a superb vocal rendition as when recorded.
Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airfl
The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside a
The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside a
The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside a
The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion. The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.
This driver features a low-mass, surface-treated aluminum/magnesium alloy cone which behaves like a piston throughout the audible frequency range, without any sign of midrange resonances. The coaxially mounted aluminum/magnesium alloy dome tweeter has a l
With a bamboo fiber paper cone, structured Santoprene surround, and underhung motor, the W5-2143 5" full range from Tang Band has impressive response from 55 to 20,000 with very low distortion.
Tang Band's unique W5-1138SMF is the 5-1/4" driver of choice for ultra-miniaturized subwoofer systems intended for computer workstations, offices, and even mobile audio applications.
With a bamboo fiber paper cone, structured Santoprene surround, and underhung motor, the W4-2142 4" full range from Tang Band has impressive response from 60 to 20,000 with very low distortion.
The Tang Band W4-1337SDF 4" driver achieves extended range and high efficiency, thanks in large part to its exotic titanium cone.
A blend of paper and Bamboo fibers provides a perfect combination of light weight and self-damping. A neodymium motor with a copper ring reduces distortion even further. The result of these features is a smooth frequency response with a very natural, open
