Recessed "L" pad housing for flush mounting "L" pads in custom speaker cabinets. Knob included. 2-5/8" x 2-5/8" x 1". For use with any standard 3/8" shaft diameter L-pad.
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 100 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaf
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 16 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 16 ohm loads, features a 3/8" sha
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance at a constant 16 ohm load. This 100 watt RMS L-pad is designed to be used with 16 ohm loads, features a 3/8" shaft length,
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 50 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft
L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. This L-pad is rated at 15 watts RMS, is designed to be used with 8 ohm loads, features a 3/8" shaft
Rectangular recessed panel with insulated, gold plated 5-way binding posts. Accepts up to 10 gauge wire. Standard spacing for use with dual banana plugs. Overall size: 92 x 79 mm ; cutout 73 x 54 mm. Includes gasket.
22" long jumper wire terminated with .205" female disconnects on both ends.
High quality, gold plated terminals with set screws for speaker and power connections on high power home and car audio applications.
For bass applications, also in power speaker systems.
A bass-midrange speaker of an appealing design which can even be used as a full range speaker when applying careful frequency-response correction.
Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.).
A dual channel speaker enables the placement of a single unit in small areas such as bathrooms, hallways, walk-in closets, and kitchens. This minimizes expense and maintains stereo integrity throughout the whole-house audio system. Installs in minutes.
Battery clip for 9V battery or 9V snap-type battery holder.
Tang Band's 2" W2-2040 RBM micro subwoofer is designed with two cones and two surrounds to offer high fidelity low frequency reproduction to almost any application.
Milled from solid brass, with a 24 karat gold plating for maximum signal transfer, BFA style banana plugs are built with a polycarbonate shell to provide protection from unintended contact and accept up to 8 AWG wire.
This 2.1 x 5.5 mm DC coax jack has an internal switch that disconnects other power sources when the AC adapter is plugged in. Its 0.33" long shaft thread mounts in panels up to 0.25" thick.
Master arm switch covers help to protect essential electronic circuits from accidental power on. Quick power off is accomplished by closing the switch cover. Master arm switch covers are designed to work with light, medium, and heavy duty toggle switches
Master arm switch covers help to protect essential electronic circuits from accidental power on. Quick power off is accomplished by closing the switch cover. Master arm switch covers are designed to work with light, medium, and heavy duty toggle switches
A good project or prototype deserves a well-thought out power solution. For 6V power, installation doesn't get much cleaner or simpler than this four D cell battery holder.
The EVAL1 stereo evaluation kit creates effortless signal and power supply connections for a stereo 1ET400A setup. The kit is developed for evaluation purposes, but is perfect suitably for DIY applications.
The 1ET400A is a single-channel, ultra-high performance, analog-input Class D amplifier module capable of over 400W of power and provides an audio quality level that sets the standard for power amplifiers of any operating class.
Designed with speaker builders in mind, these white cloverleaf pitches boards are perfect for passive crossover designs. The cloverleaf pitches allows for fast & easy connections.
Designed with speaker builders in mind, these white cloverleaf pitches boards are perfect for passive crossover designs. The cloverleaf pitches allows for fast & easy connections.
