Discovery D2608/913000 1" Textile Dome Tweeter

Name: Scan-Speak Discovery D2608/913000 1" Textile Dome Tweeter
Brand: Scan-Speak
Price: 72.25 EUR
Availability: InStock

Toon alle Audio componenten

Merk: Scan-Speak

Vergelijk

€ 59,71€ 72,25 4 Op voorraad: Levertijd: 1 werkdag

Verzending altijd verzekerd en met track & trace
Voor 16u besteld, vandaag verstuurd
Gratis verzending vanaf €99
In-house technische support

Productomschrijving

Highlights

Very low mass textile soft dome diaphragm
Optimized magnet system with double magnet
Low damping magnetic fluid cooling
Fully Vented Motor System for Low compression
8 ohm, positive terminal with white paint mark
Replaceable voice coil assembly
Black Die-Cast Aluminum Face Plate
Made in Denmark

Product Details

Scan-Speak Discovery D2608/913000 1" Textile Dome Tweeter

The Discovery tweeter uses a very light, low mass “soft dome" with high internal damping, and a highly-optimized, low-compression magnet system, which was designed especially for the low mass dome. The result is a driver that has both good sensitivity and an impressive range into the lower frequencies. The low mass dome, coupled with a fully vented motor system provides non-compressed sound reproduction over the entire frequency response. This combination allows the Discovery tweeter to be used in systems with lower cross-over points than is recommended for most normal tweeters, making this product a powerful tool for any acoustic designer in the process of tuning a system.

PRODUCT SPECIFICATIONS

Nominal Diameter	1"
Power Handling (RMS)	80 Watts
Power Handling (max)	400 Watts
Impedance	8 ohms
Frequency Response	- Hz
Sensitivity	91.3 dB 2.83V/1m
Voice Coil Diameter	1.02"

THIELE-SMALL PARAMETERS

Resonant Frequency (Fs)	700 Hz
DC Resistance (Re)	5.6 ohms
Voice Coil Inductance (Le)	0.04 mH
Mechanical Q (Qms)	0.51
Electromagnetic Q (Qes)	0.65
Total Q (Qts)	0.29
Compliance Equivalent Volume (Vas)	0.0007 ft.³
BL Product (BL)	2.6 Tm
Mechanical Compliance of Suspension (Cms)	0.29 mm/N
Diaphragm Mass Inc. Airload (Mms)	0.18g
Maximum Linear Excursion (Xmax)	0.5 mm
Surface Area of Cone (Sd)	7 cm²