SB Acoustics

SB17NAC35-8 Tiefmitteltöner

The SB Acoustics SB17NAC35-8 features a vented cast aluminum chassis for optimum strength and low compression. Its geometrically reinforced aluminum cone allows an optimum piston operation and reduced break-up.

SB17NAC35-4 Tiefmitteltöner

The SB Acoustics SB17NAC35-4 features a vented cast aluminum chassis for optimum strength and low compression and a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.

SB15NBAC30-4 Tiefmitteltöner

The SB Acoustics SB15NBAC30-4 is a powerful 5’’ midwoofer with a vented chassis that provides optimum strength and allows low compression. Its geometrically reinforced aluminum cone gives it an optimum piston operation and a reduced break-up.

SB23CACS45-8 Tieftöner

SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.

Satori WO24P-8 Tieftöner

The Satori range was founded to separate more expensive projects from a wider range of more affordable – but still high-end – SB Acoustics products. As we get more experience, new materials, better simulation tools, we believe in benefiting the customer w

Satori MR13PNW-4 Tiefmitteltöner

The Satori range was founded to separate more expensive projects from a wider range of more affordable - but still high-end - SB Acoustics products.
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, feat

Satori MR13P-8 Tiefmitteltöner

SB Acoustics Satori MR13P-8 Midrange is a simply outstanding Neodymium magnet 5" 8 ohm midrange, featuring a supplemented proprietary Papyrus Paper cone, a specially designed soft low damping optimum response rubber surround, BiMax spider, and a glassfibe

SB29RDNC-C000-4 Ring-Kalotten-Hochtöner

This tweeter features a proprietary fabric ring dome with a large roll surround. Stabilizing the center of the dome greatly reduces distortion and brings the acoustic center of the tweeter back to the voice coil, with the added benefit of increased sensit

SB29RDC-C000-4 Ring-Kalotten-Hochtöner

This tweeter features a proprietary fabric ring dome with a large roll surround. Stabilizing the center of the dome greatly reduces distortion and brings the acoustic center of the tweeter back to the voice coil, with the added benefit of increased sensit

SB21RDC-C000-4 Ring-Kalotten-Hochtöner

Non-resonant diaphragm design for minimum high frequency break-up and dual balanced compression chamber for improved dynamics. Copper cap for reduced voice coil inductance and minimum phase shift.

SB29SDAC-C000-4 Kalotten-Hochtöner

The SB29SDAC-C000-4’s large surround dome allows the increase of its acoustic output. Dual balanced compression chamber for improved dynamics. CCAW voice coil for low moving mass. Saturation controlled motor system for low distortion and low resonance fre

SB26STCN-C000-4 Kalotten-Hochtöner

SB Acoustics SB26STCN-C000-4 Tweeter has a Neodymium magnet (unusual in this price range). Its copper cap pole piece, coated textile dome, 1” voice coil and the small 72mm OD proprietary face plate give it a partially loaded horn profile. Highly linear re

SB26ST-C000-5 Kalotten-Hochtöner

Optimized damping in pole cavity to eliminate internal reflection. Fine weave soft fabric dome provides a smooth frequency response. Saturation controlled motor system for reduced distortion. CCAW voice coil for low moving mass. Long life silver lead wire

Satori WG29-187 87mm Waveguide

SB26STWGC-4 Kalotten-Hochtöner

Solid aluminium waveguide, Controlled directivity, Adapter ring for bolt-less mounting to driver, Copper cap for reduced voice coil inductance and minimum phase shift, Non-reflective rear chamber with optimized damping for improved dynamics.

SB17MFC35-8 Tiefmitteltöner

In-house made mineral filled PP-cone. Low damping rubber surround for improved transient response. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and extra rigidity. Shorting copper cap on

SB26CDC-C000-4 Kalotten-Hochtöner

The well-designed SB26CDC-C000-4 tweeter not only matches the SB Acoustics Ceramic woofers aesthetically but also technically. Thanks to the low resonance frequency, linear response and high power handling, this tweeter is ideally suited for the more dema

SB34NRX-00 Passivradiator

The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.

SB29NRX-00 Passivradiator

This driver is built similarly to the active woofer and is a good match to the SB29SWNRX-S75 10" subwoofer. In 0.75 to 1.0 cubic foot with that woofer one has an F3 of about 35Hz. It also mates well with the SB29NRX75-6 10" woofer.

SW26DAC-00 Passivradiator

SB Acoustics has made its new 10" passive radiator, the SW26DAC-00 to match their already active SW26DAC76 woofers. Simulating them in BassBox Pro produces some very good looking results.

SB20PFC30-8 Tiefmitteltöner

The SB Acoustics SB20PFC30-8 is an 8" papyrus fiber paper cone woofer with a great value for its build quality and performance. Its components make it a good choice for many different enclosure types.

SB20PFC30-4 Tiefmitteltöner

The SB Acoustics SB20PFC30-4 is an 8" papyrus fiber paper cone woofer with a great value for its build quality and performance. Its components make it a good choice for many different enclosure types.

SB16PFC25-4-COAX Koaxiallautsprecher

The SB Acoustics SB16PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.

SB16PFC25-8 Tiefmitteltöner

The SB Acoustics SB16PFC25-8 is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.