The Fusion Remote Kit is suitable for extending all FusionAmp models with remote compatibility.
SMPS3kA400 2 x 65 VDC 3000 Watt Switch Mode Power Supply is specifically designed for use the Ncore and UcD amplifier modules. This SMPS comes with the required Hypex Cable Set SMPS3k.
The FA252 2x250 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.
50cm balanced signal cable with 4-pin connectors on both sides to connect the DLCP to the UcD modules.
50cm balanced signal cable with 4-pin connectors on both sides to connect the DLCP to the NC400 module.
The FA501 500 Watt FusionAmp is a DSP controlled plate amplifier. It can be the basis of a powerful active subwoofer or an active one-way monitor.
The UcD2k amplifier module is an entry level high-end class D amplifier from Hypex. The UcD2k is known for its high performance, reliability and ease of use. The UcD2k comes with the required UcD Signal Cable.
50cm balanced signal cable with 4-pin connectors on both sides to connect the DLCP to the UcD modules.
50cm balanced signal cable with 4-pin connectors on both sides to connect the DLCP to the NC400 module.
The Hypex DIY Monoblock Case is an aluminum case with predrilled holes for the NC400 or UcD700HG amplifier modules and their respective supplies.
The SMPS1200A400 onto 2x NC400 Connection kit is designed for easy connection between one SMPS1200A400 and two NC400 modules.
SMPS3kA700 2 x 85 VDC 3000 Watt Switch Mode Power Supply is specially designed to be used in combination with an UcD2k module or multiple UcD700HG HxR modules. This SMPS comes with the required Hypex Cable Set SMPS3k.
The FA503 2x500 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.
The UcD2k amplifier module is an entry level high-end class D amplifier from Hypex. The UcD2k is known for its high performance, reliability and ease of use. The UcD2k comes with the required UcD Signal Cable.
Build your own high-quality class D amplifier based on the Ncore technology from Hypex. The NC400 monoblock kit is probably the best and most easy way to get a high-end HiFi system in your living room.
The UcD180HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD180HG hxR comes with the required UcD Signal Cable.
The NC400 amplifier module is an extremely high-quality class D power amplifier module based on NCore technology from Hypex.
The Hypex DIY Monoblock Case is an aluminum case with predrilled holes for the NC400 or UcD700HG amplifier modules and their respective supplies.
SMPS3kA700 2 x 85 VDC 3000 Watt Switch Mode Power Supply is specially designed to be used in combination with an UcD2k module or multiple UcD700HG HxR modules. This SMPS comes with the required Hypex Cable Set SMPS3k.
SMPS600N400 2 x 65 VDC 600 Watt Switch Mode Power Supply is specially designed to be used in combination with the NC400 module.
DLCP 2x6 Digital Loudspeaker Cross-over Platform is a complete hardware/firmware platform for digitally filtered (6 channels) and corrected active multiway loudspeakers.
The FA502 2x500 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.
The FA251 250 Watt FusionAmp is a DSP controlled plate amplifier. It can be the basis of a powerful active subwoofer or an active one-way monitor.
The UcD400HG amplifier module is an entry level high-end class D amplifier from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD400HG comes with the required UcD Signal Cable.
