The Hypex DIY Monoblock Case is an aluminum case with predrilled holes for the NC400 or UcD700HG amplifier modules and their respective supplies.
The Fusion Remote Kit is suitable for extending all FusionAmp models with remote compatibility.
The Hypex Remote Control is a remote controller which can be used in combination with the Fusion Amp remote kit.
SMPS3kA400 2 x 65 VDC 3000 Watt Switch Mode Power Supply is specifically designed for use the Ncore and UcD amplifier modules. This SMPS comes with the required Hypex Cable Set SMPS3k.
SMPS1200A180 2 x 46 VDC 1200 Watt Switch Mode Power Supply is specially designed to be used in combination with multiple UcD180HG and UcD180HG HxR modules. This SMPS comes with the required Hypex Cable Set SMPS1200.
The Softstart module is used to minimize transformer inrush currents and provide for push button control at the same time.
The UcD2k amplifier module is an entry level high-end class D amplifier from Hypex. The UcD2k is known for its high performance, reliability and ease of use. The UcD2k comes with the required UcD Signal Cable.
The UcD700HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD700HG HxR comes with the required UcD Signal Cable.
The UcD180HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD180HG hxR comes with the required UcD Signal Cable.
50cm balanced signal cable with 4-pin connectors on both sides to connect the DLCP to the NC400 module.
The Hypex DIY Monoblock Case is an aluminum case with predrilled holes for the NC400 or UcD700HG amplifier modules and their respective supplies.
The SMPS1200A400 onto 2x NC400 Connection kit is designed for easy connection between one SMPS1200A400 and two NC400 modules.
The Fusion Remote Kit is suitable for extending all FusionAmp models with remote compatibility.
The Hypex Remote Control is a remote controller which can be used in combination with the Fusion Amp remote kit.
The HPR12 is a 12V voltage regulator. Together with the HNR12 it forms the optional HxR upgrade for UcD180HG and Ucd400HG.
SMPS3kA400 2 x 65 VDC 3000 Watt Switch Mode Power Supply is specially designed to be used in combination with multiple UcD400HG, UcD400HG HxR or NC400 modules. This SMPS comes with the required Hypex Cable Set SMPS3k.
SMPS1200A700 2 x 85 VDC 1200 Watt Switch Mode Power Supply is specially designed to be used in combination with the UcD700HG HxR module. This SMPS comes with the required Hypex Cable Set SMPS1200.
DLCP 2x6 Digital Loudspeaker Cross-over Platform is a complete hardware/firmware platform for digitally filtered (6 channels) and corrected active multiway loudspeakers.
The FA503 2x500 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.
The FA253 2x250 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.
The FA252 2x250 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.
The FA123 2x125 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.
The UcD2k amplifier module is an entry level high-end class D amplifier from Hypex. The UcD2k is known for its high performance, reliability and ease of use. The UcD2k comes with the required UcD Signal Cable.
The UcD700HG HxR amplifier module is an entry level high-end class D amplifier, with HxR upgrade from Hypex. This amplifier is known for its high performance, reliability and ease of use. The UcD700HG HxR comes with the required UcD Signal Cable.
